residential

Residential Lifts - Planning Services

Pandect low rise platform lifts provide quality access solutions to a wide range of indoor and outdoor settings and environments throughout Australasia including:

  • Deck or verandah access
  • Any threshold barrier
  • Internal or external split levels
  • Access from drive or pathway
  • Garage to home access

Design

Pandect lift's are a compact design that are 'easy on the eye' without imposing too great a visual impact with their surroundings. The manufacturer's powder coated colour usually blends in well with any environment however colour options are available to suit individual settings. There is also the option of stainless steel fabrication.

Pandect assists our distributors by discussing each individual lift order and recommending the best possible match of lift for the particular need/environment. This includes the provision of a lift diagram specific to the particular job. Our distributors also undertake site visits to determine suitability and positioning as required.

To assist you in identifying the most appropriate lift model that suits your needs please click on residential lift guide calculator

Installation

Given New Zealand’s close proximity and frequency of freight connections we can supply these companies very competitively and with short lead times.

Pandect's distributors will liaise with you throughout the process from enquiry through to installation and commissioning of the lift (and servicing thereafter) providing suitably qualified technicians and advice as required.

They will provide relevant parties with all the information they require in order to ensure the surrounding built environment is prepared appropriately prior to the lifts installation.

               Key points:

    • Pandect lifts are surface mounted to either concrete or timber floor joists using a bolt down system. No pit is required. No structural load bearing wall is required
    • Ensure correct tolerances between the lift and the surrounding surfaces are allowed for - as per specific lift drawing
    • Ensure all built surfaces are flush, plumb and without projections (smooth)
    • Ensure the lift base is suitable and/or prepared correctly - important the lift's bolt down 'T' Frame is affixed to a flat and square base
    • Pandect's distributors can review plans and, in conjunction with Pandect, provide site specific installation diagrams
    • The Installation Instructions provided by Pandect have been reviewed and signed off by an independent Structural Engineer and must be complied with

Technical Drawings

For shop and installation drawings please click on residential technical drawings

In addition CAD elevations (dwg & dxf formats) are available through our distributors for direct placement into building plans.

Compliance

Pandect supports its distributors with the provision of Safety and Compliance documents including:

    • Producer Statement Design - PS1
    • Producer Statement Design Review - Structural - PS2
    • Producer Statement Design Review - Lift Installation - PS2
    • Producer Statement Design Review - Lift Safety Certificate (Standards Compliance) - PS2
    • Lift Particulars Schedule
    • Pressure Test Certificate - Manufacturer’s In Factory
    • Installer’s Checklist - Site Hazard, Safety & Equipment Test
    • Associated Lift Documentation
    • Signage - Disabled Access

Please click on residential brochure & model specifications or contact us for additional product information

 

 

" The staff you sent to do the job..."
Copyright © 2020 Vestner NZ Limited. All rights reserved. Website by Limelight Online