educational facilities

Education Providers - Planning Services

Pandect low rise platform lifts provide quality access solutions to a wide range of indoor and outdoor settings and environments throughout Australasia including:

  • Stage access
  • Orchestra pits
  • Libraries
  • External classroom access
  • Pre-fab classroom access
  • Gymnasiums
  • Swimming pools/changing rooms
  • General access

Design

The design of Pandect lifts, including colour (options) and fabrication suits any setting without interfering with the building layout. Pandect lifts are ‘subtle’ on the surrounding environment and do not ‘impose’ on the visual layout of the location.

Pandect assists our distributors and their customers with the choice of lift to suit the required functionality and location including a site specific lift diagram. Site visits can also be undertaken by our distributors to determine suitability and positioning.

Installation

Given New Zealand’s close proximity and frequency of freight connections we can supply these companies very competitively and with short lead times.

Pandect recommends lift installation is undertaken by suitably qualified contractors/technicians. Pandect's distributors will advise you further on this to ensure the lift and adjacent built environment is appropriate for the lift to operate in.

               Key points:

    • Pandect lifts are surface mounted to either concrete or timber floor joists using a bolt down system
    • Where lifts are installed within purpose built walls and immediately behind flush mounted doors, some models have the option of being pit installed (60mm pit depth only)
    • Correct tolerances are allowed for between the moving lift platform and its surrounding surfaces
    • Surrounding surfaces are plumb, flush and smooth
    • The lift base is flat and square
    • Pandect's distributors can review plans and, in conjunction with Pandect, provide site specific installation diagrams
    • The Installation Instructions provided by Pandect have been reviewed and signed off by an independent Structural Engineer and must be complied with

Technical Drawings

For shop and installation drawings please click on commercial technical drawings

In addition CAD elevations (dwg & dxf formats) are available through our distributors for direct placement into building plans.

Compliance

In support of Compliance and Safety requirements, relevant documentation is provided to all distributors as required including:

    • PS1 – Producer Statement Design
    • PS2 – Producer Statement Design Review – Structural
    • PS2 - Producer Statement Design Review - Lift Installation
    • PS2 – Producer Statement Design Review – Lift Safety Certificate (Standards Compliance)
    • Lift Particulars Schedule
    • Manufacturer’s In Factory Pressure Test Certificate
    • Installer’s Site Hazard, Safety & Equipment Test Checklist
    • Annual Inspection Check List
    • Associated Lift Documentation
    • Disabled Access Signage

For additional product information please click on commercial brochure & model specifications or contact us

 

Copyright © 2020 Vestner NZ Limited. All rights reserved. Website by Limelight Online